Manual toggle press
2.5 - 50 kN | HKPV
BalTec Maschinenbau AG
- The precise and non-floating adjustable V-guide guarantees accurate working, even with tools without guidance (not 2.5kN HKP/E)
- The detachable spigot clamp allows frontal loading. By means of the spigot clamp a high holding force is achieved without damage to the fixing spigot
- The head of the press is guided by an H7 manufactured flat guidance
- The daylight can be quickly and easily adjusted by means of a fine pitch thread operated by a crank handle (not 2.5kN HKP/E)
- Table with wide T-grooved clamping surface
- Extended gap and height frames can be extended further if required (not for 2.5kN HKP/E and 2.5kN HKPV)
- The range of application can be substantially expanded by means of customer-specific accessory equipment
- For models 8/12 kN and 8/16 kN HKPV, the pressure force can be increased from 8kN to 12kN, or from 8kN to 16kN respectively, by simply changing the bearing bolt of the toggle lever. The height of stroke is thereby reduced to ca. 25mm
- By comparison our toggle presses reach there listed nominal force at the bottom dead centre with a lever operating force of 400 to 100N (4 to 10 kg)
