Cartridge filling system B-MASTER

For filling standard pressure vessels for paintballing Filling pressures: 200 bar / 300 bar The B-MASTER filling panel serves to fill compressed air cartridges in the high pressure ranges of 200 or 300 bar, primarily for paintball markers. The B-MASTER filling panel is mounted externally, i.e. suitable piping is to be routed between the compressor and filling panel. Using a t-connector, the pressure supply line can be distributed to additional panels (when filling several cartridges at the same pressure). The filling pressure in the pressure vessel is displayed via a pressure gauge in bar/psi. In the B-MASTER MAXI, the safety valve is mounted as standard (otherwise as an option) so that the pressure supply does not have to be protected to 200 or 300 bar here. The safety valve is set at the factory. The high-performance filling valve is rust-proof and has a service life of several hundred thousand switching cycles. The filling hose is bled automatically once you let go of the operating lever. A silencer reduces the level of noise that occurs. The filling coupling fits all standard paintball nipples and is equipped with a check valve. The valve prevents the filling hose from moving around in the event that it is accidentally activated without a marker being attached. B-MASTER – paintball filling device: Filling panels for “table-top mounting” with enclosed plastic housing Can be attached via four bores on the base Direct valve actuation Automatic bleed Adjustable valve play Upper and lower valve stop setting Rust-proof valves with several hundred thousand switching cycles Pressure input at rear of housing