Load pin load cell
max. 300 kN | 5716 - 5796 series
BCM SENSOR TECHNOLOGIES bvba
Features
- single-ended shear beam
- capacity from 10 kN to 300 kN
- conditioned signal available on request
- accuracy of 0.2%fs
- mild steel construction with nickel plated treatment (5716)
17^PH construction (5796)
- environment protection grade up to IP 68 (only for 5796)
Applications
- draft sensors
- crane scales
- hopper weighing
- process system
- onboard vehicle weighing
Description
Based on BCM advanced metal foil strain gauge technology, 5716/5796 load pins are made of single-ended shear-
beam working principle. 5716/5796 load pin is mostly used as a shaft of sensor function as the one half of the shaft can
be considered as a stationary part while the other half intends to have a shearing shift corresponding to the stationary
part.
The 5716/5796 load pins can be used to measure the forces ranging from 10 kN to 300 kN with an accuracy up to
0.2%fs (fs = full scale). Amplified and conditioned output signal such as 4~20mAor 0.5-5V or 0.5~10V are available on
request. These load pins can be sealed to high protection grade of IP 68 so as to be operated under harsh industrial
environment. Depending on the application, the cable outlet can be made either from the thread end of the load pin or
the load end of the load pin. In addition to the standard thread, other threads are available, on request, as long as the
requested threads match to the diameter of the concerned load pin.
5716/5796 load pins are often served as traction-force sensors (draft sensors) to be installed in crane system, hopper
system, process system, and onboard vehicle system where the single-ended shaft of senor is necessary to measure
the concerned force.
- single-ended shear beam
- capacity from 10 kN to 300 kN
- conditioned signal available on request
- accuracy of 0.2%fs
- mild steel construction with nickel plated treatment (5716)
17^PH construction (5796)
- environment protection grade up to IP 68 (only for 5796)
Applications
- draft sensors
- crane scales
- hopper weighing
- process system
- onboard vehicle weighing
Description
Based on BCM advanced metal foil strain gauge technology, 5716/5796 load pins are made of single-ended shear-
beam working principle. 5716/5796 load pin is mostly used as a shaft of sensor function as the one half of the shaft can
be considered as a stationary part while the other half intends to have a shearing shift corresponding to the stationary
part.
The 5716/5796 load pins can be used to measure the forces ranging from 10 kN to 300 kN with an accuracy up to
0.2%fs (fs = full scale). Amplified and conditioned output signal such as 4~20mAor 0.5-5V or 0.5~10V are available on
request. These load pins can be sealed to high protection grade of IP 68 so as to be operated under harsh industrial
environment. Depending on the application, the cable outlet can be made either from the thread end of the load pin or
the load end of the load pin. In addition to the standard thread, other threads are available, on request, as long as the
requested threads match to the diameter of the concerned load pin.
5716/5796 load pins are often served as traction-force sensors (draft sensors) to be installed in crane system, hopper
system, process system, and onboard vehicle system where the single-ended shaft of senor is necessary to measure
the concerned force.
