Liquid ring vacuum pump BDRY series
screwgeardry

liquid ring vacuum pump
liquid ring vacuum pump
Add to favorites
Compare this product
 

Characteristics

Technology
liquid ring, screw, gear
Lubrication
dry
Number of stages
single-stage
Applications
gas, water, liquid
Other characteristics
small
Ultimate vacuum

0.01 Torr, 0.03 Torr
(0 psi, 0 psi)

Flow rate

Min.: 110 m³/h
(3,884.61 ft³/h)

Max.: 1,250 m³/h
(44,143.33 ft³/h)

Power

Min.: 4 kW
(5.44 hp)

Max.: 30 kW
(40.79 hp)

Operating temperature

120 °C, 150 °C
(248 °F, 302 °F)

Noise level

79 dB, 85 dB

Weight

Min.: 190 kg
(418.88 lb)

Max.: 900 kg
(1,984.16 lb)

Description

Screw Vacuum Pump have an inherent disadvantage when it comes to draining and flushing. The exhaust port is small and is not at the lowest point in the Vacuum Pump so liquid will not drain out of the Vacuum Pump. But, the exhaust port of BDRY Vacuum Pump is big and is at the lowest point in the Vacuum Pump so liquid will drain out of the Vacuum Pump smoothly. 2 Gas ballast: The basic principle of ballast is that Non-condensable gas (N2 or air) is admitted into a pump during the gas compression stages. This increases the percentage of non-condensable gas such that the partial pressure of the vapor being pumped is below its saturated vapor pressure. 3 Gear Oil Coolant Jacket: The lubricant oil in the gear box is cooled by a cooling water jacket.

Catalogs

No catalogs are available for this product.

See all of Bgs General Srl‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.