cPC2PMC64-T - cPCI Hot Swap dual PMC Carrier 64Bit / 66MHz for H110 : CompactPCI dual PMC carrier for 64-bit / 66MHz hot-swap applications. Uses the HB6 bridge chip from HiNT ensuring full compliance with PICMG 2.1 R2.0 with PI = 1 support. cPC2PMC64 - cPCI Hot Swap dual PMC Carrier 64Bit / 66MHz : CompactPCI dual PMC carrier for 64-bit / 66MHz hot-swap applications. Uses the HB6 bridge chip from HiNT ensuring full compliance with PICMG 2.1 R2.0 with PI = 1 support. Two versions are available providing a choice of I/O depending on whether P4 is being used for the H110 telecoms bus. cPC2PMC-T - Hot Swap dual PMC Carrier for Telco Applications : CompactPCI Hot Swap Dual PMC Carrier, the same as cPC2PMC but with the rear I/O from the PMC sites routed to J3 and J5 instead of J3 and J4. This alternative pinout is compatible with systems using H110 backplanes. cPC2PMC - Hot Swap dual CompactPCI PMC Carrier : CompactPCI Hot Swap Dual PMC Carrier, compatible with cPCI Hot Swap specification 2.1 R1.0, Uses Texas Instruments PC12250 33MHz 32bit PCI bridge conforming to PCI local bus specification 2.2, PMC rear I/O via J3 and J4, 3.3 or 5 Volt signalling. Full hot swap support under Windows 2000 and XP Embedded.