The professional laserprofessional turntable 400 enables to mark single workpieces in the area of the laser according to laser protection class 1. The turntable rotates throughout 180 degrees. New parts may be placed at the front side and at the same time parts may be laser-marked in the back. Release of a rotation is made by two-hand operation on release of the laser after having finished a marking process. The laser irradiation does not cause any danger neither for the operator’s skin nor eyes. The laser may be adjusted by means of a stepper motor manufacturers driven depth-axis from two push buttons in the external operation panel. The laser safety cover includes integrated vacuum piping for extraction of particles and contaminants created during manufacturers of laser marking. Different accessories needed during the marking process may be clamped right-angled to the marking area on the base plates of the turntable. For positioning workpieces the housing includes at one side a set-up door with integrated laser protection glass. A switched power socket for external accessories is provided at the rear panel of the housing. The laser turntable may be connected to all different standardized voltage supplies. Cable installation between laser and laser safety housing is daisy chained and interlocked to ensure user safety during laser operation. The cover is color-coated in grey.
