Conveyor belt fastener for heavy-duty belts
max. 1 750 N/mm, 7.5 - 15 mm | G2002
Cobra
Product Features
♦ Solid strip fastener: One complete fastener strip is installed on the belt across the full width preventing loss or damage during transportation
and storage.
♦ High strength of the joint: The "staggered" arrangement of the staples enables a splice with a high tensile and dynamic strength to be installed.
The loads are spread across the "staggered" staple
arrangement.
♦ Good alignment of the joint: The fasteners are installed with the hammer tool. Install the fastener on either side and in the centre of the
splice ensuring the fasteners are square to the belt and then install the fasteners across the full width. Because of the good alignment, it is very easy for the connecting pin to be inserted.
♦ Less impact force during the operation: The front edge of the fastener is chamfered which decreases the impact and wear to idlers, pulleys and
