Motor-driven rotary indexing table TR + CNC-RAD/REC

for tanksfor sinkssingle-spindle

The ultimate technological development in sink grinding units. While maintaining the same operational flexibility as the CNC working units, the the CNC-RAD grinding unit, or CNC-REC they can operate with single or double units, equipped with: Pneumatic, software-operated working pressure control; Automatic wheel centering, to define the smoothing angle; Possibility to add another rotating axle to the CNC-REC, in order to tilt the grinding unit. . These special units may operate on their own, or combined with a working bench, or to a rotary table. The gripper spindle can be steady or moved by one or two controlled axles, which are interposable with the grinding unit’s axles. Possibility to add a scotch-brite wheel on the contact wheel supporting arm. Possibility to grind and glaze? tanks with an internal radiant angle ranging from 8 to 10 millimetres thanks to a special belt-tensioning equipment. The CNC-REC grinding unit is suited to grind sinks that have a 90° radiant angle. Pros: Possibility to grind tanks/tubs with a radiant angle over 20 millimeters. Possibility to grind tanks/tubs with a 90 degrees angle. Possibility to grind the inner surface of tanks/tubs with a 8 to 10 millimeters radiant angle; High production rate thanks to the Rotary Table and the hidden loading/unloading times.