Watch the video

Gate CPE APE

FOG-16 Rising Fence Barrier

The electro-mechanical rising barrier with upper and lower rigid skirt, type FOG18, simultaneously controls the access of both vehicles and pedestrians to a controlled zone. The rigid skirt effectively prohibits access to all pedestrians who have not been duly authorized. As an option, an electro-magnetic arm tip support further reinforces the pedestrian control and eliminates any possibility of opening the barrier by hand, due to its magnetic disk which generates traction of around 200 kg holding force. The maximum length of the barrier arm is 16ft. (5m).

DESCRIPTION

Cabinet fabricated of 3mm thick welded and folded sheet steel with skeletal structure of thick-section welded steel profiles.
Removable upper cover, locked from the inside.
Side doors with security locks affording easy access to the internal mechanism.
Arm of extruded aluminum tubes, white enameled with red reflecting strips. The arm is composed of 3 tubes with decreasing diameters that fit into one another and a tip end plug.
Rigid skirt formed by a frame constructed of square steel profiles of 30 x 30 mm, in-filled with hot-galvanized steel wire lattice work. In the standard version, the unit is painted white, except for the wire lattice.
Stainless steel rods absorbing the tension of the wire lattice on its frame
Electro-mechanical unit, including :
120V motor,
permanently lubricated endless screw speed reducer,
driven by grooved pulleys and V- belt, making it possible to adapt the speed as a function of the length of the arm,
transmission of the movements by crankshaft/rod system allowing smooth progressive accelerations and decelerations, as well as mechanical locking of the arm in the end positions,
passage security assured by a safety torque limiter with friction adjustable by Ferodo disks, with integrated automatic wear compensation system,
limit switches activated by adjustable cams.
Balance of the arm/skirt unit ensured by integrated compression spring, eliminating any risk of personal injury, due to the limited number of moving parts directly accessible to the public.
Electric control logic type PLC on printed circuit for control by 3-button box with change-over contactors, heat protection, general connection block and test toggle switches. Including a 3-button box (open - stop - close).
Integrated ambient heater.
Emergency handle for manual operation in case of power failure, with safety switch cutting off the electrical power supply when the handle is in place in the barrier.
Standard arm tip support provided as basic equipment. The model in the illustration is the electro-magnetic arm tip support, available as an option.
Frame to be sealed, composed of a basement template with threaded rods and fixing brackets.