Derived from the PVCFLEX 8001 concept, but for higher production rates such as 120 to 160 frames per day, the PVCFLEX 9001 offers the same standard of performance, strength and flexibility. Profiles of a maximum length of 6.5 meters are transferred automatically from the 10 to 20 bar loader to the bar feeder n°1 and inserted into the machining system comprising 16 electrospindles running at 24,000 rpm. All the machining of bolt cases, handle recesses, drains, decompression and ventilation fittings, etc., is carried out on all 4 faces. The complete profiles are then conveyed to bar feed n°2 and inserted into the sawing unit to make straight cuts, mitre cuts, V cuts and points. To balance machining time with respect to sawing time, it is possible to incorporate into the cutting center between 2 and 3 additional machining units, thus obtaining optimum rates. Each machining center is also capable of feeding parts either directly to the operator or, using a 2-axes robot, for unloading and automatic classification.