Toothed clutch SED

electromagneticfor high-torque applicationswith bearings

The SED tooth electromagnetic clutch is characterized by its small dimensions in relation to its high torque transmission capacity and by its self-centering bearing inductor-coil arrangement. Due to its construction, it does not allow landslides and must be selected with the appropriate safety margin. The SED Tooth Electromagnetic Clutch is used in two modes, in clutch and disengagement: Engaging must be carried out at a standstill or at low speed, depending on the inertia of the system. The higher the inertia, the lower the speed and, for strong inertia, the clutch at rest. Disengagement can be carried out at any speed. These units can work in any position and also in lubricated environments, etc. The good thing about it, apart from its extensive characteristics, is that the SED toothed electromagnetic clutch, due to its composition, does not require any special maintenance. This clutch has the following features to highlight: Ring gear transmission without slip rings. Possibility of synchronism. Normalized voltage 24 V.DC The SED Tooth Electromagnetic Clutch can be used for different types of machinery such as: Graphic arts Container and packaging Textile sector Cleaning vehicles It can also be mounted on any machinery that requires high torques, no slippage, tight spaces, etc. And they can be connected at rest or with minimal activity. The montage The SED tooth electromagnetic clutch can be assembled by joining two shafts in line, by means of an elastic coupling, or by joining shafts in parallel, by means of pinions, pulleys, etc.