Wall mount enclosure
IP 55, NEMA 12, IK 10 | MASE
ELDON
Body:
Folded and seam welded. Four 8.5mm diameter holes for wall fixing, pressed out in 20.4mm diameter x 2mm depressions to allow air circulation around the rear part of the enclosure.
Door:
Surface mounted with 130º opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow left or right hand opening. From size MASE0505021R5 and above there are two removable mounting profiles on the door. Sealing is ensured by a conductive polyurethane EMC gasket.
Lock:
Chrome plated double-bit lock with 3mm insert and 90º movement. 1000mm high enclosures and above have espagnolette three point locking system.
Mounting plate:
The mounting plate is marked vertically at 10mm intervals for easy horizontal positioning of equipment. On the top and bottom are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800mm and above are strengthened by folded edges. By using the AMG accessory the mounting plate can be adjusted to any depth.
-
zoom
