MIG / MAG welder
max. 340 A | ELEKTROMIG 350 TH ELEKTROSTA

MAIN ADVANTAGES
x Linear adjustment of the voltage (7 ranges) and of the wire speed : softer welding with less spatters
x built in or separated feeder unit with 4 feed rolls
x User's comfort with pre-adjusted parameters : pre gas, post gas, wire approach speed
x Direct or reverse wire's polarity
x 2 strokes or 4 strokes mode
x Digital display to visualize : real current, pre-displayed and real voltage, wire speed
x U and I memorised at weld end
x Protection for over rated intensity
x Overheat indicator
x Fan capacities : forced air
stop + 2 speeds controlled by thermostat
x Socket for remote control

TECHNICAL CHARACTERISTICS OF POWER SOURCE
x Mains : three phase 230V or 400V 50/60 Hz
x Maximum power consumption : 16 kVA
x Off load voltage : 11-34 V
x Welding current at 40% : 340A
Welding current at 60% : 280A
Welding current at 100% : 230A
x Standards : EN 60974-1 / EN 50199 - CE marking

TECHNICAL CHARACTERISTICS OF WIRE FEEDER
x Type of wires : steel, stainless steel, aluminium and flux cored wire
x Diameter : 0.8 mm to 1.2 mm
x 4 feed rolls
x Wire feeding speed : 1.5 to 20 m/mn