Shot peening machine
Engineered Abrasives

A patented shot peening index machine is a rotary table machine with a determined number of index stops or stations. Parts are loaded at each station, every 60 degrees on table (ie. 6-station).

Parts are run through as follows:

1. Load and Unload Station: parts are placed here for blasting and also unloaded here post blasting
2. Blasting Station: parts are being blasted with a number of blast guns.
* The guns can be fixed or move in a vertical or horizontal travel
* Parts are loaded and unloaded during the blast cycle
* Parts are loaded on fixtures that will rotate parts at the blast station
* Part rotation and nozzle travel are adjustable
* Media feed and air pressure are also adjustable
3. Air Blow Off Station: parts will be blown off with air jets aimed at O.D. and I.D. of part. This is done in a separate chamber out of the blast area. Vertical doors completely seal the blasting enclosure during the blast cycle.
* All units are lined with ¼" polyurethane for wear protection and 2" foam for noise containment
* ¼" polyurethane will out-last rubber liners 30:1
* Bearings in back side of cabinet have blow-offs
* Adjustable gun rods are 1"-1-1/2" solid steel and A2 tool steel (62 RC)
* Gun rod holders and locking bolts are made from A2 tool
* Steel (62RC) for long life