Model MMC71 Multi-Material Cutter is capable of cutting a wide range of materials, including flat material up to 3.3” inches wide, tubing up to 3/16” OD, and wire up to 14 AWG stranded or 16 AWG solid. The MMC71 works great on flat material such as heat shrink tubing, tapes, foils, ribbon cable and more, and is even capable of cutting silicone tubing. The machine is easily programmable, offering ten fixed feed rates, ten fixed cut rates, and storage for up to 99 batches and 10 kits (depending on available memory). Material guides are easily adjustable for each application. Additional guide kits are available to allow multiple pieces of the same material to be cut at the same time, increasing operator efficiency and production rate. The unit is fully electric and does not require an air supply.
The MMC71 and MMC200 Multi-Material Cutters from The Eraser Company provide solutions for a wide range of industrial cutting applications.
Model MMC71 can cut flat material up to 3.3 inches wide, tubing up to 3/16, seven-inch outer diameter, and wire up to 14 gauge stranded or 16 gauge solid. This cutter works great on flat material, such as heat shrink tubing, tapes, foils, ribbon cable, and more. And is even capable of cutting silicon tubing.
The machine is easily programmable, offering 10 feed rates, 10 cut rates, and storage for up to 99 batches and 10 kits. Material guides are adjustable for each application. Additional guide kits are available to allow multiple pieces of the same material to be cut at the same time, increasing operator efficiency and production rate.