Auto-darkening welding helmet
DIN 10-12, DIN 10/11, DIN5-13, DIN9-13 | Eye-tech™ II series
ESAB
The 10-12 is an excellent helmet for people working in repair and maintenance as it provides shade cover for MMA and MIG welding at between 100-300 amps. The helmet can also be used for TIG welding at between 70-300 amps. The shade setting potentiometer has been put on the outside of the helmet from where it can set even with the gloved hand.
Eye-Tech™ II 10/11
The entry level helmet in the Eye-Tech II range is the 10-11, a two shade helmet designed for Mig/Mag and MMA welding.
Eye-Tech™ II 5-13
The Eye-Tech 5-13 is suitable for almost all applications, MIG, MMA, and TIG welding, even on very low amperage, grinding, gas welding and plasma cutting. All adjustments, such as the shade setting, the sensitivity and the delay, are done on the satellite, found on the outside of the helmet shell. The grinding mode (DIN 4) can be easily activated from the outside.
Eye-Tech™ II 9-13
By setting the manual/auto switch to auto, the helmet will detect the intensity from the welding arc and set the shade accordingly. It is also possible to fine-tune the selected shade using the potentiometer. Alternatively, you can set the switch to manual and set the shade level yourself. As all the controls on the Eye-Tech II, 9-13 are on the outside of the helmet, you do not have to take the helmet off to set the sensitivity or the delay.
