Leak test bench For Test
ET99M-COM

3 expansion connectors allow ET99M-COM to interface with PC, PLC, local printers, automatic and semi automatic stations, FOR TEST© accessories.

The leak interception tracer ET99M-COM finds out the leaks in the external environment of the piece that must be tested.
This test system applies in every components type, provided that there is the possibility to contain the same one in a airtight bell or the possibility to intercept the escape on two different chambers (valves in general). The test is carried out pressurizing the detail from the inner side or from one of the two chambers, and then there is the detection of the pressure variation in the environment situated between the bell and the element or in the other chamber.
ET99M-COM can furthermore execute a control of optional seal on the bell and it is combined with a rapid drainage valve for tests which are superior to 5 Bar.
This test system is suitable for execute tests with acceptance test pressure till 200 Bar, as it is structured in order to respect the necessary safety conditions not only for the operator, but also for the surrounding environment.
This test system is characterized by a highest sensibility (according to rules 10/100 times compared to the traditional systems, and more over working with elevated pressures) and by the test execution speed, as the same one coincides with the pressurization phase of the detail that must be tested.

Improvements of ET99M:

-Measurement resolution of 0.1 Pa (1.000.000 points on the full scale)
-Multi-language interface selectable from the menu
-RS232, USB, Ethernet connectors
-Selectable Units of measurement: mBar, Bar, mBar/s, cc/min, cc/h, Pa, hPa

More specifications...