video corpo

steel strap strapping head / with seal / electric / pneumatic
MH150 FROMM

{{requestButtons}}

Characteristics

  • Strap type:

    for steel straps

  • Type:

    with seal

  • Options:

    electric, pneumatic

Description

Advantages
- Heavy strong construction and high reliability of 98%
- The perfect double notch joint of the tool A482 (A483) guarantees 75% of the tensile strength of the steel strap (similar to 80% reached with 3 punches but a lot higher then 55% with 2 punches necessary for small packs/coils)
- All current steel straps can be used with elongation from 600-1100N/mm2 / 87000-160000psi
- Packs can be dirty or with grease (no problems like with welding joints)
- Using seals available in the market (competitors ask for their own seal)
- The strap is tensioned through a profiled tension wheel, driven by motor-gear frequency controlled, adjustment by pneumatic clutch with manometer
- No tension released (not necessary an opposite joint or the Microlock joint)
- Min. parcel width is 80mm (90mm for 32mm) with hard package, the min coil diam. is approx. 400mm.
- Small hexagonal tubes with 85mm side
- Strapping line asymmetric for slit coils: radial strap through the eye for coils with ext. diameter 700-800mm
- Circumferential strap for coils with ext. diameter aprox.400mm
- Strap feed and retract speed is frequency controlled and therefore adjustable
- Low wearing material; wearing parts in contact with the seal are made for A482 (A483) so available in stock
- Mechanical switch/sensor to detect the parcel
- Std Vertical installation including an head stroke to strap packs with similar packs (in a range of 50mm)
- Option lateral installation to strap packs with Hmin=350mm with strap line at 300mm
- Option horizontal installation to strap packs with Hmin=200mm with strap line at 150mm