Pilot hydraulic directional control valve JSSC100 series
manual

pilot hydraulic directional control valve
pilot hydraulic directional control valve
pilot hydraulic directional control valve
Add to favorites
Compare this product
 

Characteristics

Actuating method
manual, pilot
Operating pressure

Max.: 100 bar
(1,450 psi)

Min.: 30 bar
(435 psi)

Flow rate

Max.: 20 l/min
(5 us gal/min)

Min.: 5 l/min
(1 us gal/min)

Description

Hydraulic pilot controls can be used in all valve series and most of the application sectors: joysticks for tele handlers, excavators and forklifts. Pneumatic pilot control valves These pilot control valves are normally used in industrial vehicles, as well as in travelling and tilting machinery. Flexible cable remote controls The valves activated with flexible cable remote controls are used mostly in agricultural machinery such as front-loaders, baling machines, brush cutters and silage choppers-mixers. WORKING CONDITIONS This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm2/s – 46cSt viscosity at 40°C temperature. Max. back,pressure,on T outlet port,3 bar – 43.5 psi Max. hysteresis 0.5 bar – 7.25 psi Internal leakage (all ports),at 30 bar – 435 psi, P®Tfrom 2.5 to 4.5 cm3/min. – from 0.15 to 0.27 in3/min. Fluid Mineral oil Fluid temperature with NBR (BUNA-N) seals from -10°C to 80 °C – from 14 °F to 176 °F Viscosityo perating range from 15 to 75 mm2/s – from 15 to 75 cSt min. 12 mm2/s – 12 cSt max. 400 mm2/s – 400 cSt Max. contamination level -/15/12 – ISO 4406 – NASI638 class 6 Ambient temperature without electric devices from -40 °C to 60 °C- from 40 °F to 140 °F with electric devices from -20 °C to 50 °C- from -4 °F to 122 °F Tie rod tightening torque (wrench 13) only for JSSC100-101 24 Nm – 17.7 lbft

Catalogs

No catalogs are available for this product.

See all of GMS Hydraulic Components‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.