Products > Material, Chemical, Adhesive, Lubrication > Cutting fluid > Hangsterfer's

Synthetic cutting fluid
Crystal Cut 243 Hangsterfer's

Crystal Cut 243 can be used for general machining and turning of cast iron and steel. Crystal Cut 243 can also be used for some grinding applications. It is designed for use between 3% and 10%. As the hardness of the material increases, the concentration should also increase.

Materials

Cast Iron, Ductile Iron, Carbon Steel, Cast Steel, Hardened Steel. For Operations and Concentrations please contact your local representative.

Instructions

Always premix coolant before adding to the machine sump. When mixing coolant by hand it is important to always add the concentrate to the water, then agitate. For best results a Hangsterfer’s recommended proportioning unit should be used. To maintain recommended concentration, make-up or top-up should be added at one-half the desired concentration. To maintain 6% in the machine, first charge the machine at 6%, then as needed add make-up at 3%. Never add straight water or concentrate directly to the machine.