Metal workbench with work surface in sheet metal, medium (MDF) or chestnut. Composed of a work surface, a lower tray or a reinforcing bar and 2 sets of feet. Painted in hammered blue, kiln dried before degreasing and phosphating. 2 mm thick and 50 mm high sheet metal worktop with three longitudinal reinforcements welded by resistance, 2 mm thick, which gives it a great rigidity, drilled every 55 mm in all its length, which allows legs and drawers to be fixed (see catalogue). Work top in medium or chestnut 50mm thick. 2 holes drilled and milled in each of the four corners allow the feet to be fixed on the work surface. Bottom plate or reinforcing bar made of 2mm thick sheet metal with 4 holes for fixing to the feet with screws. Two sets of legs for fixing the work surface and supporting the lower shelf. Welded structure in 2 and 3 mm thick sheet metal with non-slip vulcanised rubber bases. The workbench can support a distributed load of 1000Kg, it is delivered disassembled with corresponding screws, nuts and washers. (Various options see our catalogue)