Hydraulic flow control valve
1/4 - 1", 350 bar | VPC
Holmbury
uncontrolled descent of a load in the event of a hose
failure. They should be screwed directly into the lifting
device (normally a cylinder), or
into an in-line manifold that should be
mounted as close as possible
to the lifting device.
A flow regulator valve, set
at least 50% higher than the
regulated flow, should be fitted
downstream from the hose burst
valve at the end of the flexible hose.
APPLICATIONS
Lifting equipment and machinery where it is necessary
to safeguard against excessive flow rates.
MATERIALS
Zinc plated carbon steel body.
TECHNICAL DETAILS
Maximum working pressure for all sizes is 350 bar.
-
zoom
