video corpo

Belt thickener for sludge treatment
DB Huber Technology

The trough-shaped design of the feed reactor ensures the optimal conditioning and uniform distribution of the sludge over the full width of the filter belt.

The filter belt is guided horizontally by a drive and a tensioning roller. Via a feed chute positioned above the tensioning roller the sludge is smoothly fed onto the filter belt and transported towards the sludge discharge point by the slowly travelling filter belt. The sludge flocks are then gently settling on the rotating filter cloth and the water separated by flocculation drains off by gravity. The sludge cake is taken off the filter belt by a plastic doctor blade mounted on the drive roller.

{{requestButtons}}
Favorites

Other Huber Technology products

Thickening

ROTAMAT® Screens

Perforated Plate and Bar Screens

STEP SCREEN®s

Ultra Fine Screens

Sewage Sludge Screens

Screens and Fine Screens

Screenings treatment

Grit separation and treatment

Screening

Dewatering

Drying

Conveyors

Membrane bioreactor (MBR)

Micro screening / filtration

Sedimentation tanks

Flotation

Pumping station screens

Energy from wastewater

Stainless steel equipment