Stainless Steel turbines for water and chemicals The 316 stainless steel range of flow turbines are suitable for almost any clean low to medium viscosity fluid. Stainless Steel turbines for water and chemicals Working on the well proven turbine principle, the flow of liquid acts against the angled surfaces of a set of precision turbine blades causing them to rotate. The movement of the tip of each blade is detected by a sensor located in the body of the meter. This is then converted in to a pulsed signal, the frequency of which is proportional to the flow rate through the meter. A high pressure rating of up to 400 bar and temperature rating of 110°C make this unit perfect for many industries. Available in 12 sizes from 1 L/min up to 9000 L/min, and with screwed or flanged connections, means there is aunit to meet your requirements. A millivolt sinewave, amplified squarewave or 4-20mA analogue signal is available.