Hydraulic return filter
max. 10 bar | DTEF 320 INTERNORMEN Technology

Return-line filters change-over in the DTEF series are suitable for a working pressure up to 10 bar. Pressure peaks will be absorbed by a sufficient margin of safety. The DTEF-filters are directly mounted to the reservoir and connected to the return-line.
A three-way-change-over valve which is integrated in the middle of the housing makes it possible to switch from the dirty filter-side to the clean filter-side without interrupting operation.
The filter element consists of a star-shaped, pleated filter material which is supported on the inside by a perforated core tube and is bonded to the end caps with a high-quality adhesive. The flow is from outside to inside. Filters finer than 40 μm should use throuw-away elements made of paper or Interpor fleece (glass fibre). Filter elements as fine as 5 μm (c) are available; finer filter elements on request.
INTERNORMEN-Filters can be used for petroleum-based fluids, HW emulsions, water glycols, most synthetic fluids and lubrication fluids.
Consult factory for specific fluid applications.
INTERNORMEN-Filters elements are known as stable elements which have excellent filtration capabilities and a high dirt retaining capacity, therefore having a long service life. Due to its practical design, the return-line filter is easy to service.
When changing the filter element a detachable connection between the filter head and the filter bowl prevents a flow back of dirty oil into the tank.