Cold air coolant nozzle for micro-lubrication applications
-10°C | 606MLBSP
ITW Vortec
ITW Vortec now has the solution with its Micro-Lube Cold Air Gun, Model 606MLBSP.
In the special Micro-Lube Cold Air Gun a vortex tube converts normal compressed air into (hot air and) cold air with a temperature of - 10°C. The hot air is not used and vented. No refrigerants required and quite operation.
The micro-lubrication oil is fed in from the lubricator unit (not included) via a
flexible tube and runs through the Micro-Lube Cold Air Gun and is, together with the cold air, blown out of the flexible nozzle onto the machining operation.
Because of the extra cooling, the production speed and/or tool life can be increased and, depending on the operation, the surface quality of the material can be improved as well.
The 606MLBSP Micro-Lube Cold Air Gun is mounted on a Magnetic Base and can be easily positioned where the micro-lubrication is required. If necessary, the Cold Air Gun can be screwed down directly, after the Magnetic Base has been removed.
The compressed air connection is via a ¼"BSP male nipple and a 3 mm flexible tube from the lubricator unit can be connected via a quick-connect coupling.
-
zoom
