Water spray air humidifier-cooler
±4 % rh, 1,080 kg/h | Condair FF2
JS Humidifiers
The Condair FF2 high pressure spray humidifier is capable of delivering up to 1,080kg/h of moisture to a duct or air handling unit.
It is ideal for AHUs that have multiple humidification and adiabatic cooling elements as a single pump station can feed nozzles grids in up to four different ducts.
Even at maximum output, the low energy humidifier will only consume 3.2kW of power while delivering a potential 745kW of adiabatic cooling.
The Condair FF2 consists of a high pressure pump station that feeds water to a grid of atomising nozzles located inside a duct that are spraying towards a droplet eliminator.
The airstream absorbs the mist after about 0.8m to 1.3m with the remaining droplets being removed from the airstream by an evaporative matrix. As water flows down this particle free matrix it is absorbed by the air passing through, thus increasing humidification efficiency and reducing waste water.
The complete system has a relatively low pressure drop on the airstream of around 45Pa and is quiet in operation. It has a hygienic design and has been VDI6022 approved. Drain and flush cycles ensure that no water can remain in the system during periods of non-operation.
The spray nozzles are made from stainless steel and have a ceramic insert that provides a wide spraying angle for more rapid absorption and efficient humidity control. The humidifier can achieve ±4%RH.
-
zoom
