• Continuous regulated 12VDC and 24VDC output
• 150 Watt total output power
• Programmable dynamic power management
• <%90 efficiency, fanless cooling
• Operation current without load <9 mA
• Programmable Ah and input power capacity
• Temperature regulated, electronic charge management
• Relay outputs for alarm and status notify
• MODBUS Communication to PLC and RTU
• Rail and panel mountable
NB100 is a microprocessor controlled industrial type continuous DC power supply which is used in industrial and SCADA applications and automation.
When DC input voltage exists, the microprocessor controlled accumulator or group of accumulators are charged regarding the ambience temperature in the light of manufacturer’s suggestions. During the charge, input voltage is regulated and it feeds load at the terminals of 12VDC and 24VDC outputs independent of charge operation. In case of power interrupt, accumulator is switched to regulator inputs, which feed the loads, to provide continuous DC power. High discharge on accumulator or group of accumulators is electronically controlled and in case of decrease in accumulator voltage exceeds safe threshold voltage, connection with the load is cut.
With its dynamical power management feature, NB100 shares power between accumulator and load regarding load has higher priority when the current demand of load increases and staying between the total power limit of the device. Hence, load can use total power in case of demand. For a right dynamical power management only thing that is needed to be done is programming current capacity connected to input and Ah value.
