Media filtration oil mist collector with extraction arm KLIMAWENT

Application
The oil mist separator OMS is designed for cleaning the air from oil mist during production processes. It is especially
recommended for extraction the oil particles of cooling-lubricating fl uids, that are used for metal machining (e.g., turning,
milling, drilling).
The appliance is not appropriate for capturing the caustic substances that can have a bad infl uence on the device and for
compounds creating explosive mixtures with the air.

Structure
The separator is divided in three chambers, and the air stream is fl owing subsequently through following chambers:
– oil sedimentation chamber – equipped with connection for the oil-saturated air,
– fi ltering chamber equipped with three fi ltering sections,
– fan chamber with a fan with radial impeller and control panel,
– silencer.
In the fi ltering chamber proceeds the three-stage cleaning process of the contaminated air.
First the air stream goes through the labyrinthine fi lter, next is the net fi lter and fi nally through the pocket fi lter of oil-resist-
ant polypropylene. Each fi lter can be easily disassembled and cleaned. The captured oil volume is accumulating in the oil
sedimentation chamber. Underneath this chamber is located the oil drainage valve from where it is collected in a contain-
er* for oil.
In order to reduce the noise level is used a silencer.
During the use a continuous technical supervision is not necessary.
Oil mist separator – OMS-2
* The container for oil is not a standard equipment of the oil mist separator.