Differential pressure sensor
0 - 50 mbar | PMP
KOBOLD INSTRUMENTATION
Description
The differential pressure sensor PMP Is used for controlling
and measuring the differential pressure of air or non-corrosive
gases. It Is mainly used for the monitoring of filters or filter
cartridges measuring the pressure difference before and after
the filter chamber.
Cleaning cycles can be determined by means of the pro-
grammable relay. If a predefined differential pressure Is
reached, the rinsing process can be started e.g. automati-
cally via the solenoid valves, and the second relay produces
an alarm if the differential pressure increases further on.
Thus, the cleaning cycles can be optimised and considerable
quantities of compressed air can be saved.
The differential pressure is shown on a four-digit display. For a
remote transmission, a 4-20 mA output signal is provided.
The device Is controlled by a micro processor.
-
zoom
