Directional control valve 80 l/min, max 320 bar | WL 4.06
KRACHT
The directional control valves WL consists of housing, a control spool with two centering springs and cylindrical operating solenoids. The three-position directional valves are fitted with two solenoids and two springs. Two-position directional valves have either one solenoid and one return spring or two solenoids and a detent assembly. The operating solenoids are D.C. solenoids. For AC supply the solenoids are provided with a rectifier, which is integrated directly into the connector. The plug connectors can be turned by 90°. By loosening the fixing nut, the solenoids can be turned arbitrarily in the range of 360°, or replaced. This enables the operating coils to be replaced without opening the pressure-tight spaces. In the case of solenoid malfunction or power failure, the spool of the valve can be repositioned by manual override, provided the pressure in T-port does not exceed 25 bar. The basic surface treatment of the valve housing is phosphate coated and the operating solenoids are zinc coated.
