Rotary vane vacuum pump FAPS series
oil-freesingle-stageair-cooled

rotary vane vacuum pump
rotary vane vacuum pump
Add to favorites
Compare this product
 

Characteristics

Technology
rotary vane
Lubrication
oil-free
Number of stages
single-stage
Other characteristics
air-cooled
Ultimate vacuum

0.5 mbar
(0.01 psi)

Flow rate

Min.: 0 m³/h
(0 ft³/h)

Max.: 6,100 m³/h
(215,419.47 ft³/h)

Description

The rotary compressor is made up of a cylindrical stator, inside of which a rotor, supported at its ends by two bases, rotates. This eccentrically fixed rotor has some slots where the vanes that slide over the internal surface of the stator are housed. The vanes form a set of cells, the volumes of which gradually increase from the intake port and which, afterwards, gradu- ally decrease down to the impulsion/drive port. When the rotor is rotating the vanes move outwards, under the action of the centrifugal strenght, and they get into contact with the internal surface of the stator. Our rotary vanes equipment is certified under ATEX directive 94/9/CE, which is required in order to allow installation in places where potentially explosive atmospheres may form. An explo- sive atmos-phere arises from the mixture of air with a fuel tak- ing the form of gas, vapour, mist or dust, in a proportion such that excessive temperatures, electrical arcs, sparks or other ignition sources, with sufficient energy, can lead to an explosion.

Catalogs

No catalogs are available for this product.

See all of MAPNER‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.