Epoxy adhesive EP21TDC-4
for metalglassfor rubber

epoxy adhesive
epoxy adhesive
epoxy adhesive
Add to favorites
Compare this product
 

Characteristics

Chemical composition
epoxy
Type of substrate
for metal, glass, for rubber, for ceramics, for plastics, for composite materials
Number of components
two-component
Technical characteristics
elastic, heat-cured, electrically insulating, high peel strength
Applications
industrial, sealing, for coating, for OEM, for the aerospace industry

Description

Key Features ■ High peel strength ■ Outstanding adhesion to rubbers ■ Excellent thermal cycling resistance ■ Withstands 1,000 hours 85°C/85% RH Master Bond EP21TDC-4 is a two component, very flexible epoxy for high performance bonding, sealing and coating. It has a non-critical one to four mix ratio by weight. This system has a relatively long open time of 90-120 minutes for a 100 gram mass. EP21TDC-4 has a room temperature cure that can be accelerated by adding heat. The optimum cure schedule is 12 hours at 75°F followed by 3-5 hours at 140-160°F. An unusual feature of this product is that straight heat curing results in a product that is slightly softer (50-60 Shore A), than the one with the optimum cure (75-85 Shore A). The cured system has a peel strength greater than 25-35 pli and an elongation of over 200%. EP21TDC-4 bonds well to a wide variety of metals, plastics and especially rubbers. In fact, it usually adheres well to rubbers such as neoprene, nitrile, SBR and occasionally EPDM, although surface treatment of the rubbers (especially EPDM) will allow for better adhesion. EP21TDC-4 has excellent electrical insulation properties along with good chemical resistance to oils and water. The epoxy has superior resistance to rigorous thermal cycling along with an outstanding ability to resist mechanical shock and vibration. The color of Part A is clear and Part B is amber-brown. It has an operating temperature range of -100°F to +250°F. EP21TDC-4 can be used in aerospace, electrical, OEM, electronic as well as repair and maintenance applications, where the special properties described above are desirable.

Catalogs

No catalogs are available for this product.

See all of Master Bond‘s catalogs

Other Master Bond products

Epoxy systems

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.