Automatic marking machine for identification nameplates and tags
Mecco
The tag feeder is equipped with an adjustable loading rack, which can be quickly readjusted for a wide range of tag sizes. Standard machine size is 15 mm to 75 mm for width and 20 mm to 105 mm for length.
The MC-2000 plate feed system is equipped to mark in both manual and automatic modes. The manual mode gives you the ability to perform any one of the tag system functions through a series of push buttons located on the front of the machine. By simply moving the selector switch to the manual mode you can now move the pusher bar forward to check for clearance in the systems rails or mark a single tag to check mark location and quality of mark.
The MC-2000 tag feeder is also equipped with warning signals in case of a system jam or if the machine runs out of tags. The control box can also be programmed to mark a specified number of tags or mark until the stacker is empty.
All of the same characteristics that are found in the standard MC-2000 control box are included in the tag feed system.
General Specifications:
Electrically driven pusher
Adjustable push bar
Two- (2) tag feed bars for different size tags
Four inch high stacker
One (1) tag weight with handle
Sixteen inch tag transfer table
Spring-loaded computer activated tag lock
Four-inch restacker chute
Adjustable slotted base
Manual/Automatic capabilities
Includes all wiring and software to work with the standard MC-2000
One (1) operator's manual
Spare parts for complete machine include:
1-limit switch for tag unit
1-limit switch for MC-2000 unit
1-solenoid
1-spring
1-pin
1-oil
1-grease
1-set fuses
1-pin guide wrench
-
video
-
zoom
