Frequency converter for asynchronous motor
FC750

FC750 is a very simple, yet efficient Plug & Play frequency converter for the growing market in simple speed control of 3 phase asyncronous Alternating current motors. The FC750 has been specifically developed for the continuously demanding market involving seamless speed control of especially Professional fans, pumps, ventilators and any simple AC motor application FC750 is an totally integrated and encapsulated frequency industrial converter, with a very simple Interface,, and a very sophisticated set of fault control systems, that will ensure the motor to RUN, even in extreme conditions. The IP54 or higher professional cabinet will ensure that there will be no need for an extra Cabinet, as usually with FC´s. The integrated Emc filtering in the FC750 makes it an ideal solution for many applications, where Plug & Play is a first issue. No need for an external professional filter, no need for an exernal cabinet, no need for any "irritating" setup menus,, just plug it in, and you have a motor that spins as nice as with any other converter.
FC750 has as standard a 0-10 / 2-10V input control range with an auxilary START/STOP signal. Just a wire to the Gnd to make it spin. Also, there is an extra signal, that could make the motor turn in the opposite direction, just connect DIR to Gnd,, if it is needed. FC750 also has an "inbuild" motor protection, that will ensure that motors do not get overheated. The function can be adjusted in 9 steps from the Dipswitch. DIP=0 means NO protection. FC750 will stop the motor and activate the Alarm relay when current has been exeeded for ten times.
FC750 is not the controller for machinery etc, but is meant as a highly integrated power device for small AC motors. Fans, Pumps etc will benefit of this compact Controller. Also, applications requiring simple installation and a high grade of encapsulation will have to contact Motron for more info.

More specifications...