Temperature controller
Tempman

Temp Man is a standard Suppliers of temperature controller to be used with external fan controllers and servo motors. It is very simple and easy to use with a simple and very robust design. Beep feedback from key professional presses and a clear display makes daily use a simple job.
Temp Man controls the climate from the meassured temperature, an SET point for temperature plus diverse parametres. All settings are stored in EEPROM by power failure and easy to set.. IP54 grade and integrated keypads in the front makes the controller usefull in different forms for environments, especially usefull in agricultural.
The temperature comes from the HIGHEST of the Primary and the secondary temperature sensor manufacturers inputs. If only ONE sensor is attached, a SHORT HAVE TO BE placed in the secondary temp sensor input
The temperature is primarily controlled by varying the speed to an attached motorcontroller and FAN . In addition, the AUX output can be configured to control Industrial dampers, Servo motors, extra professional fans or anything else that can be controlled by an 0-10V signal.
Temp man is a Proportional controller, and the two 0-10V outputs is controlled from setpoint and temperature.The Xp band is distributed around the Setpoint, ½ on each side. If MIN is set > MAX, the 0-10V output will be reversed, for heating purposes etc. So, both heating and cooling can be performed, at the same time, from the outputs.
Temperature is set 10-40ºC, and the actual temperature is read out In the display from 0-50ºC. Minimumsettings, Maximumsettings and Xp band can be set individually set for the FAN and AUX outputs.
In addition, the aux and relay output can be offset +/- 9.9ºC relative to the setpoint. An MAX relay will activate when DC output reaches the MAXIMUM setting for the FAN !
Historically Min and Max temperature can be read out on the Min/Max keys.
Pressing both keys simultanous will reset min/max to actual temperatures

More specifications...