Three-phase wet and dry vacuum cleaner
100 L, 4 kW | 3508W Nilfisk-CFM

Download the Flash plug-in

Finally an industrial vacuum that can be modified and transformed in a very simple way: just adding optionals: cut-out for liquids, purge cleaning systems by cartridges, electric filter shaker, L-M-H versions. Ideal for all kind of applications, from the simplest to the most sophisticated one.

The vacuum is made up of four basic parts: chassis, filter chamber, waste bin, motor housing. The side-channel suction unit, made of aluminium casting is fitted at the base of the chassis, giving more stability to the machine. The impeller is directly driven, thus avoiding any transmission and maintenance. The special diffuser decreases the speed of the exhaust air to less than 1m/s, in compliance with European regulations EN 60335-2-69. Moreover, the diffuser provides an optimum noise level of 69 dB (A). The vacuum gauge monitors filtration efficiency. The vac is fitted with a external manual filter shaker, located on the side of the machine, easy to use and ergonomic. The greater filter surface is obtained by means of a polyester star filter, 1,95 m² as filtering surface, "L" class as standard. In presence of toxic/hazardous powders, two kinds of Absolute filters can be fitted on this vac : the Upstream HEPA filter (High Efficiency Particulate Air) - and the Downstream ULPA filter (Ultra Low Penetration Air). Respectively tested by the MPPS method (Most Penetrating Particle Size), according to EN 1822 regulations. They can be mounted together on the vac, if needed. The material is collected inside a 100 litre painted steel container provided with castors, easy to remove thanks to a handy release system.