Linear magnetic sensor 21720

Magnetic sensors passive sensors, miniature design Material: Housing aluminium. Cable sheath PVC. Version: Compact sensor and plug design. Flat connector, 8-pole, 1x pin. Connection cable, 6-wire, ø 3.55–0.3 mm. Cable bend radius, > 17 mm (static). Note: Works with magnetic tapes 21725. The reading distance between the sensor and tape must be 0.1 to 2 mm. The sensor is supplied with operating voltage and draws current via the electronics. System accuracy, repeat accuracy and travel speed is dependent on the electronics. Plug-in connection to position indicators 21700 and 21702. Technical data: - Rating IP 67; EN 60529 (sensor head) - Shock resistance 2000 m/s², 11 ms; EN 60068-2-27 - Vibration resistance 200 m/s², 50 Hz–2 kHz; EN 60068-2-6 Temperature range: - Ambient temperature 0–60°C - Storage temperature -10–70°C Assembly: Installation must be carried out using the enclosed user information. A, reading distance sensor/tape ≤ 2 mm B, lateral offset ± 2 mm C, misalignment ± 3° D, pitch gradient ± 1° E, lateral gradient ± 3° Accessory: Position indicators 21700 and 21702. Magnetic tapes 21725. Note: Relative humidity 100%. Dewing is not permissible (sensor head). Drawing reference: 1) Sine before cosine 2) Active measuring surface 3) Magnetic tape