O-ring seal / circular / puck / elastomer
23900 norelem - Éléments standard mécaniques

{{requestButtons}}

Characteristics

  • Type:

    O-ring

  • Configuration:

    circular, puck

  • Material:

    elastomer, NBR

  • Temperature limit:

    Min.: -30 °C (-22 °F)

    Max.: 100 °C (212 °F)

  • Diameter:

    Min.: 1 mm

    Max.: 250 mm

Description

O-rings

Material:
Elastomer NBR.

Version:
Shore ~70, black.

Note:
O-rings are universal sealing elements used to seal against liquid or gaseous median. They are suitable for static and minor dynamic applications. O-rings can be used for radial and axial sealing. The sealing occurs during installation by the radial or axial compression of the cross-section. During operation, the median pressure increases the deformation of the O-ring and so increases the sealing effectiveness. For best sealing effectiveness, the O-ring should have the largest possible cross-section.

During installation the correct groove size, compaction, elongation/compression should be ensured.

By static use the compaction should be 15 - 30% of the cross-section. By dynamic use it should be 10 - 18% (hydraulic), 4 - 12% (pneumatic).

With regard to the ID, when installed the O-ring should be
stretched max 6%
compressed max 3%

The material NBR has a high wear resistance and is resistant to mineral oil based lubricating oils and grease, hydraulic oils (H, H-L, H-LP), high-flashpoint pressure fluids (HFA, HFB, HFC), aliphatic hydrocarbons, silicon oil and grease, water up to ca. 80° C

Temperature range:
-30 °C to +100 °C.