Analog and digital measurement transmitter

DigiRail - Signal conditioning and digital transmitter

The DigiRail line of smart industrial transmitters with Modbus RTU comunication interface provide a simple way for integrating analog or digital signals to supervisory systems. Featuring up to two universal input analog signal channels they are the most economical way to deliver analog inputs to PROFESSIONAL PLC´s and SCADA systems. The input signals are isolated from power thus protecting the electrical instruments by eliminating ground loop effects. This reduces substantially the undesirable interferences and instabilities in sensor measurements.

Analog inputs: programmable for supplier of thermocouples (J, K, T, E, N, R, S, B), Pt100, mV, V, mA.
Cold junction compensation for thermocouples and compensation for Pt100 3-wire cables.
Digital inputs: in voltage, 4 to 35 V to activate. Internally limited current in 5 mA.
Digital outputs: 3 A / 250 Vac SPDT relay, resistive load.
Power: 10 to 35 Vdc, 50 mA maximum current.
2-wire RS485 communication with Modbus RTU protocol. Configurable address and baud rate (1,200 to 115,200bps).
Key for resetting communication parameters to original factory default.
Accuracy (at 25 °C): Pt100, mV, V and mA: ±0.15 % of full scale.
Cold junction compensation for thermocouples: 1 °C at 25 °C. ±0.05 °C / °C.
Isolation: 1000 Vac from inputs (analog or digital) and power or communication.
Dimentions: 72 x 78 x 19 mm.
Mounting: 35 mm DIN rail.
Working temperature: 0 to 70 °C.

More specifications...