Shrink hood machine
max. 60 p/h | AT53
Officina Meccanica Sestese
* Type of film used: heat shrinking polythethylene
* Film thickness: 80/200 micron
* Max coil diameter: 700 mm
* Max coil weight: 500 kg
* Type of usable gas: propane, methane
* Gas pressure: 150 to 200 mbar
* Gas consumption: abt. 0,15 Nm3 (with propane)
* Pressure of compressed air used: 5.5 ÷ 7 bar
* Compressed air consumption: 500 Nl/ciclo
* Voltage, three phase + neutral: 400 V+N+PE (+/-10%)-50 Hz
* Average thermal power installed: (which may vary depending on the machine model): abt. 320 kW
* Field of operating environmental temperature: +5°C/+40°C
DESCRIPTION
The automatic hooding machine mod. AT53 packs palletized products with tubular heat shrinking film. The hot air release linear gas burners are desigined to work both with methane and propane gas, ( validation number DG2217 BL 0557) released by the German Gas Institute, valid throughout the entire European Community.
The rear part of the machine prepares the bags, while the front part carries out the actual hooding/heat shrinking. The AT53 machine is available with one, two or three coils with tubular film with the same and/or different formats. All functions are managed by a PLC which controls all automatic and manual operations. An operator is needed only to change the film coil.
-
zoom
