Vertical injection molding machine
600 - 1 200 KN | FTV 1200 / 450 OMF TURRA

Download the Flash plug-in

The injection unit is based on the well tried and tested system using two telescopic cylinders. This arrangement enables a very compact unit to be made, suitable for use on vertical machines for which a limited machine height guarantees good performance, without harmful waving movements being caused by the use of injection units normally designed for horizontal machine models.

The closing system is based on two concentric pistons: the smaller central one is used to perform the fast opening and closing procedure, while the second external one, with the larger diameter, has the task of providing the closing force required.

The speed, the closing force and the thickness of the moulds can be adjusted using data set from the keyboard and then stored in the bulk memory of the computer on the machine. Use of external tables has now become firmly established and is universally recognized as being the best way of reducing the production cycle as the inserts are loaded while the moulding cycle is carried out. As a result, it is possible to increase productivity by 50%. Apart from this important advantage, our linear table system with angular movement, introduced way back in 1972, provides another important advantage, the distance between the moulds in the insert loading/discharge position is reduced, so that the operator no longer has to "dance about" from one side of the machine to the other.