Circular connector

Current Rating: 3 amps max

Dielectric Withstanding Voltage:
600 VAC RMS

Insulation Resistance:
5000 Meg ohms min @ 500 VDC

Contact Resistance:
26 milliohms (65 mv) max @ 2.5 amps

Mating/Unmating Force:
Forces not to exceed 6 oz/contact

Temperature Cycling:
-55 ° C to +125 ° C, 5 cycles

Humidity (Mated):
IAW MIL-STD-1344, Method 1002.2, Type II, Omit Steps 7A & 7B

Vibration:
IAW-MIL-STD-1344, Method 205.1, Test Condition IV, 20 g's

Mechanical Shock:
IAW-MIL-STD-1344, Method 2004.1, Test Condition E, 50 g's

Durability:
500 cycles

Contact Resistance after Durability:
26 milliohms (65 mv) max @ 2.5 amps

Mating/Unmating after Durability:
Forces not to exceed 6 oz/contact

Salt Professional spray:
48 hrs IAW-MIL-STD-1344, Method 1001.1, Test Condition B

Low Professional level Contact Resistance after Salt Spray:
28 milliohms max (2.8 mv) max @ 100 milliamps

Contact Resistance after Salt Spray:
28 milliohms (70 mv) max @ 2.5 amps

Mating/Unmating force after Salt Spray:
Forces not to exceed 6 oz/contact

Contact Retention after Salt Spray:
Minimum of 5 lbs contact retention

Thermal Vacuum Out gassing:
NASA SP-R-0022

Solder Heat & Contact Retention:
360 ° C for 10 sec. & contacts must withstand 5 lbs retention force

Solder ability:
MIL-STD-202, Method 208

More specifications...