Provides two power ranges for up to 8 Amps of continuous current
Step and direction (cw/ccw)mode
Active Damping%u2122, Electronic Viscosity%u2122, and ABS Damping%u2122
Encoderless stall detect
Simplified configuration
Short curcuit protection - phase-to-phase and phase-to-ground
OEMZL Microstepping Drive
4 Amp or 6 Amp @ 120 VAC (170 VDC bus voltage)
Standard step-and-direction input or CW/CCW input
Operates with standard 1.8" hybrid step motors
Anti-resonance eliminates mid-range instability and provides damping ratios of up to 0.2
CE marked for LVD compliance
UL recognized
E-AC and E-DC Microstepping Drives
AC: Designed for use with motor inductance of 0.5 mH - 80 mH AC / 0.2 mH-80 mH DC
3-state current control allows the drive and motor to run cooler and more efficiently than 2-state drives
Selectable resolution up to 50,800 steps/rev
Auto standby reduces motor current (and heating) at rest
Provides 0.02 Amps to 3.5 Amps (peak) AC / 0.2 Amps to 4.8 Amps (peak) DC
95 - 132VAC power supply suppliers input / Single 24-48 VDC power supply input
AC: 4 (AC) / 6 (DC) predefined current waveforms to optimize smoothness
LV and HV Step Motors
High Performance
Cost Effective
Optimized for both low-voltage and high-voltage applications
Five frame sizes from 11 through 34
