Electric saw mill Pilous

CTR 650
Small but very professional band mill. The design of the main component units, such as guide wheels including their bearing system, design of the saw band arm, the drive system, the feed system, etc. are identical with the type series CTR 800 or even the high performance CTR 950 Hydraulik.
With this type, the central control panel is located on a moving bridge of the saw frame. This allows for a closer contact of the operator with the material during cutting.
CTR 650S
Different from the CTR 650, the central control panel is located on a fixed pillar attached to the machine bed. This allows for comfortable machine operation from one control point.

CTR 800
Vertical and horizontal band saw movement, with variable speed, controlled by a frequency converter. Electrically controlled vertical feed for
board thickness setting enables switching to fast feed (for bigger distances) and slow feed (for exact setting of the required board thickness).
If the required board thickness is selected on the LG-Automat (accessories), the band saw moves to the set value by fast feed and
automatically slows before 'overrun' and stops at the pre-set position with the accuracy of 0,1 mm.
- Electrically controlled horizontal band saw movement; forward and reverse feeds with infinitely variable speed are controlled by a frequency converter. Turning a single button enables an infinitely variable speed change during cut, depending on the timber cut. Feed speed continuously displayed on a digital display.

CTR 950 S
The same structure as with the CTR 950 Hydraulik, but without the hydraulic equipment. Clamping and handling of the cut material is manual. This solution allows for purchasing of a value for money professional machine for cutting of large diameter trunks.
Within the scope of the unique modular system of the CTR type series, even this machine is equipped with all clamping points for additional installation of complete hydraulic accessories.

More specifications...