Push-in fitting / straight / pneumatic / capping
PPF series Pneuflex Pneumatic Co., Ltd

Characteristics

  • Fixation:

    push-in

  • Configuration:

    straight

  • Applications:

    pneumatic

  • Other characteristics:

    capping

  • Diameter:

    Min.: 4 mm

    Max.: 16 mm

  • Operating pressure:

    Min.: 0 Pa (0 psi)

    Max.: 1000000 Pa (145.04 psi)

Description

Pneumatic Fittings, Push in Fittings -- PPF Tubing Cap

Pneumatic Fittings, Plastic Push in Fittings (PT, R, BSPT, NPT) come in a variety of types, moulds and sizes to satisfy various tube demands. Accept metric and inch tube, and PT(R, BSPT), NPT thread. Working pressure from 0~1.0Mpa (0~150psi), Working temperature from 0~60ºC (32~140ºF). Accommodate metric tubing O.D ranging from 4mm to 16mm, inch tubing O.D ranging from 1/8" to 1/2". Thread sizes range is from 1/8 to 1/2.

Tubing cap is used to block unused tubing.

Specification:

Fluid Admitted: Air, Vaccum, Water(note)
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32~140°F
Applicable Tube: PU / PA / PE / PVC
Body: Nickel Plated Brass & PBT
Seal, O-ring: NBR
Lock Claw: Stainless Steel(SUS)

{{requestButtons}}
Favorites

Other Pneuflex Pneumatic Co., Ltd products

Composite Push in Fittings, Composite Push to Connect Fittings (BSPT, PT, R thread)