Water drainage router for PVC windows and doors Profteq
DR4

We have designed the water slot routers mod. DR_3 & DR_4 to offer you units able to machine a broad range of profiles. Both the DR_3 and the DR_4, in fact, can mill up to a maximum height of 180 mm, and on all three sides involved (featuring motors positioned at the front, vertically and at the rear). The length of the slots that can be made can be set, as can all the motor position adjustments. The latter are in fact controlled by means of a revolver, thus enabling you to have 6 different adjustments for each registration.
A major feature consists in the positioning of the 0 point in the inner part of the profile. This way, in a same series, the position of the 45° (adjustable angle) front motor remains unvaried, thereby allowing high machining speed. Furthermore, thanks to the conceived profile positioning, if you have profiles of different heights, by regulating the machine on the higher series and fitting compensation shims for the lower ones, the position of the motors need not be changed.
Finally, the front motors are positioned with a fixed centre distance with respect to the rear and vertical ones. This way, you have a constant reference value for inner/front milling. This will enable you to make one less manual movement of the profile to be machined.
The DR_4 differs from the DR_3 in that it has an automatic work cycle with adjustable speed of movement of the worktable: This way, you can work with 3 motors at the same time, thus saving a good deal of time. And if you fit the 2 front motors, you can machine a bar with just one single manual movement. Finally, to ensure the quick angular adjustment of the parallel front heads, indexed references are fitted.

More specifications...