Radio transceiver Radiotronix

The Wi.232DTS-R module combines a state-of-the art low power wireless transceiver with a powerful multipoint-to-multipoint protocol controller to form a transparent wireless communication solution capable of replacing wires in any RS-232/422/485 application. With a 115dB link budget and very low power operating modes, the Wi.232DTS-R module is excellent for AMR, RFID, Home Automation, and any other application requiring long range (<1600ft LOS) and long battery life .

The module is designed to be totally transparent. No special addressing or formatting of data is required. Data is validated using an internally generated CRC-16 and encoded using a proprietary algorithm. Multiple modules can operate on the same channel because of the built-in carrier-sense-multiple-access (CSMA) protocol.

The transceiver operates in two modes: low-power and DTS. In low-power mode, transmitter output power is 0dBm and the maximum data rate is 38.4kbit/sec. In DTS mode, the output power is +12dBm and the maximum data rate is 152.34kbit/sec. The DTS mode takes advantage of the FCC Part 15 Digital Transmission System (DTS) rules. Under this provision, the transmitters can operate at a higher output power if the transmission bandwidth is at least 500kHz. This means the Wi.232DTS-R can achieve +12 dBm out put power without having to use frequency hopping or direct sequence spreading techniques. This translates to fast synchronization times allowing longer duty cycles, simpler RF protocol and longer battery life for portable applications.

More specifications...