Gear pump with asynchronous motor
max. 226 dm³/min | R45 series Rickmeier GmbH

The following technical details have been provided for general information. For any assembly, operation or servicing do respect the operating manuals and the instructions provided on the roducts. Technical data, product range and order data, accessories and availability are subject to alteration. All dimensions are in millimetres.

RICKMEIER motor gear pump units as a standard are equipped with three-phase asynchronous motors under DIN EN 50347. When so requested, single-phase a.c. motors or d.c. motors are available at different voltages. To select the motor that fits for your application please refer to table 1 below.
The dimensions of the motors specified in the table of dimensions, which have not been standardised under the DIN EN 50347, relate to our standard brand (special manufactures are available on request). In table 1 you will find the motor outputs relating to the specified outlet pressures and flow rates for a kinematic viscosity of the flow medium of 33 mm²/s and a speed of 1450 rpm. For different numbers of revolutions it is possible to convert the flow rates approximately proportional to speed. You will find the dimensions for the selected unit on the following two pages in the line that has been referred to in table 1 on the right-hand side.
For rail, ship or other applications with specific vibrating stresses we recommend a heavy duty design for the unit support. This will result in changes of the hole pattern for the support attachment. Dimensions can be provided on request.