wastewater pump / with electric motor / submersible / impeller
IMM 80 Sacemi Elettropompe

{{requestButtons}}

Characteristics

  • Media:

    for wastewater

  • Operation:

    with electric motor

  • Priming:

    submersible

  • Type:

    impeller

  • Domain:

    for oil industry applications

  • Other characteristics:

    for used oil

  • Flow:

    Max.: 390 l/min (103.0271 us gal/min)

    Min.: 40 l/min (10.5669 us gal/min)

  • Head:

    20 m (65'07")

  • Power:

    Max.: 5.8 kW (7.89 hp)

    Min.: 1.15 kW (1.56 hp)

Description

IMM 80

They are suitable for transferring liquids containing impurities up to 3 mm in size.
Their hydraulic components: impeller in brass, feed screw and pump body in aluminium allow them to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3° Engel).
The temperature of the liquid must not exceed 90°C.

They are commonly used on:
- machine tools (milling and turning machines)
- glass processing machinery (TRI version)
- surface treatment plants
- filtration systems
- air-conditioning systems

They are normally installed on a tank with a capacity which is proportional to their flow rate, about 4-5 cm from the bottom.
It is important to make sure that the maximum liquid level in the tank is always 3-4 cm lower than the support flange.
Should the liquid be particularly dirty, it is advisable to build a compartment tank in order to allow the sludge to deposit before it is sucked by the pump.
For different uses, please consult our Technical Office.

Other Sacemi Elettropompe products

SACEMI